Imiyalelo yokuFakela i-Excavator Breaker

Excavator Breakerimiyalelo yokuhlohla:

1. Qinisekisa ukukhupha uxinzelelo phambi kokufakwa.
2. Susa iintambo zebhetri xa udibanisa kwaye wenze amanyathelo afanelekileyo okukhusela kwi-cylinder yeoli kunye nombhobho kufuphi ne-welding.
3. Zonke iindawo ze-welding kufuneka zifakwe kwindawo yokuba zingachaphazeli nayiphi na i-excavator.
4. Vala ivalve yokumisa i-oyile xa ulinganisa uxinzelelo.Vula ivalve yokumisa ioyile.
5. Ekufakeni, ukudibanisa kunye nokutywinwa kwentambo kufuneka kuhlanganiswe nge-adhesive tape okanye i-sealant (ukuthintela ukudibanisa kwe-tube kwi-shock slacking ngexesha lokusebenza kwe-breaker).
6. Emva kovavanyo loxinzelelo, yenza i-hose enye idibanise ne-port kunye ne-port ngaphandle, vula i-valve yokumisa, uhlambe kwaye uhlambe i-hose imizuzu engama-20.(Kunye neefoto);

7. Ubume boxinzelelo lokuphuphumala:

Umzekelo	Ngaphantsi kweJSB900	JSB1600 135mm	JSB1900 140mm	JSB3500 155mm	JSB4500 165mm	JSB5000 175mm
Uxinzelelo	Akuyomfuneko ukuseta	210	210	220	230	260

 

 

 

Iyunithi: kg/cm²

8, Ixabiso leNitrojeni: Xa iqondo lobushushu lasehlotyeni liphezulu, iN₂ixabiso elingaphantsi komgangatho liqhelekileyo.

Umzekelo	JSB200 45mm	JSB400 68mm	JSB600 75mm	JSB900 100mm	JSB1900 140mm	JSB3500 155mm	JSB4500 165mm	JSB5000 175mm
Intloko engasemva u-N2	16	16	16	16	16	16	16	16
I-Accumulator Uxinzelelo		-	-	-	-	60	60	60

Iyunithi: kg/cm²